A20-C 2 Way Stainless Steel SS304

Technical Parameters:

Assemble Drawing 

Wiring Diagram:

CR201 Wiring Diagram ( 2 wires control )

• RD connect with positive, the BK connect with negative, the valve closed, the actuator automatically power off after  in place , the valve remains fully closed position .

•BK connect with positive, the RD connect with negative, the valve open, the actuator automatically power off after in place, the valve remains fully open position .

﹡Suitable Working Voltage:DC3.5/ DC5V/DC12V/DC24V

﹡Exceeding the working voltage is forbidden

CR202 Wiring Diagram ( 2 wires control – Capacitance return in case of the power is failure)

• When SW is closed , the valve open. the actuator automatically power off after in place 

• When SW is open, the valve closed, the actuator automatically power off after in place
﹡Suitable Working Voltage: AC/DC9-24V，AC/DC110V-230V,

﹡Exceeding the working voltage is forbidden

CR301 Wiring Diagram (3 wires control )

• RD & GR connect with positive, BK connect with negative

• When OPEN( RD) & SW connected , the valve open, the actuator automatically power off after in place , valve remains fully open position

• When CLOSE(GR) & SW connected, the valve closed, the actuator automatically power off after in place, valve remains fully closed position.

﹡Suitable Working Voltage: DC5V/DC12V/DC24V,AC/DC9-35V

﹡Exceeding the working voltage is forbidden

CR302 Wiring Diagram (3 wires control )

• RD connect with positive, the BK & GR connect with negative

• SW CLOSED, the valve OPEN, the actuator automatically power off after in place.

• SW OPEN, the valve CLOSED, the actuator automatically power off after in place.

﹡Suitable Working Voltage: DC7-35V

﹡Exceeding the working voltage is forbidden

CR303 Wiring Diagram (3 wires control)

• RD& GR connect with positive, the BK connect with negative。

• SW CLOSED, the valve OPEN,  the actuator automatically power off after in place

• SW OPEN, the valve CLOSED,  the actuator automatically power off after in place.

﹡Suitable Working Voltage: AC/DC9-35V,AC/DC110-230V

﹡Exceeding the working voltage is forbidden

CR305 Wiring Diagram (3 wires control-Spring return in case of the power is failure)

• RD& GR connect with positive, the BK connect with negative。

• SW CLOSED, the valve OPEN,  the actuator automatically power off after in place

• SW OPEN, the valve CLOSED,  the actuator automatically power off after in place.

• The valve will close/open, if the power off.

﹡Suitable Working Voltage: AC/DC9-35V,AC/DC110-230V

﹡Exceeding the working voltage is forbidden

CR306 Wiring Diagram (3 wires control-Spring return in case of the power is failure)

• RD& GR connect with positive, the BK connect with negative。

• SW CLOSED, the valve CLOSED,  the actuator automatically power off after in place

• SW OPEN, the valve OPEN,  the actuator automatically power off after in place.

• The valve will close/open, if the power off.

﹡Suitable Working Voltage: AC/DC9-35V,AC/DC110-230V

﹡Exceeding the working voltage is forbidden

CR501 Wiring diagram ( with feedback signal)

• RD connect with positive, the BK connect with negative，the valve closed, the actuator automatically power off after in place .

• BK connect with positive, the RD connect with negative，the valve open, the actuator automatically power off after in place .

• GR & WT are connect when the valve open fully, YW & WT are connect when the valve closed fully

   Suitable Working Voltage:：DC5V/DC12V/DC24V

   Exceeding the working voltage is forbidden

CR502 Wiring diagram ( with feedback signal)

• When SW is closed , the valve open. the actuator automatically power off after in place 

• When SW is open, the valve closed, the actuator automatically power off after in place

﹡GR & WT are connect when the valve open fully, YW & WT are connect when the valve closed fully

﹡Suitable Working Voltage: AC/DC9-24V, AC/DC9-35V, AC/DC110V-230V

﹡Exceeding the working voltage is forbidden

CR701 Wiring Diagram ( 7 wires control with feedback signal )

• RD connect with positive

• GR connect with SW and negative wiring

• BK connect with negative wiring

• SW open. the valve open, and keeping fully open.

• SW closed. the valve closed, and keeping fully closed.

• BL & GY connect with the valve’s fully open signal wiring

• YW & WT connect with the valve’s fully closed signal wiring.

﹡Suitable Working Voltage: DC7-35V

﹡Exceeding the working voltage is forbidden

※ Feedback with load ability：

① The Max. off voltage: DC36V AC220V

② The Max. off current: ≦0.4A

CR702 Wiring Diagram ( 7 wires control with feedback signal )

• RD & GR connect with positive, the BK connect with negative

• When RD & SW connected, the valve open, the actuator automatically power off after the valve fully open.

• When GR & SW connected, the valve closed, the actuator automatically power off after the valve fully closed,.

• BL & GY connect with the valve’s fully open signal wiring

• YW & WT connect with the valve’s fully closed signal wiring

﹡Suitable Working Voltage: DC5V/DC12V/DC24V

﹡Exceeding the working voltage is forbidden

※ Feedback with load ability：

① The Max. off voltage: DC36V AC220V

② The Max. off current: ≦0.4A

CR703 Wiring Diagram ( 7 wires control with feedback signal )

·RD& GR connect with positive, the BK connect with negative。

·SW CLOSED, the valve OPEN,  the actuator automatically power off after in place

·SW OPEN, the valve CLOSED,  the actuator automatically power off after in place.

·BL & GY connect with the valve’s fully open signal wiring

·YW & WT connect with the valve’s fully closed signal wiring.

﹡Suitable Working Voltage: DC12V/AC/DC24V

﹡Exceeding the working voltage is forbidden